Product Description

Sandline Dry Mix Cement Plaster is ready to use by just mixing water at site. This process eliminates job-site mixing practices. Hence it gives consistent quality with required Aggregates mesh sizes in exact proportion which is most important for compactness of plaster. Further to have desired workability, less rebounding losses, required slump properties and overall durability. It’s a polymer modified Dry Mix Plaster.

Application Procedure

Surface Preparation: The surface should be rigid, and free from oil, grease, paint, loose plaster or any other dirt particles. Wet the wall before application of plaster.

Mixing: In a clean bucket mix thoroughly one 40kg bag Sandline Dry Mix Cement Plaster SL 303 with appropriate 6-7 liters of clean water (Depending upon Climate Condition). It is recommended to use mechanical mixer to achieve a homogeneous mix. For large quantity a mixer such as a concrete mixer can be used. Allow the mix to mature for 5 minutes before application.

Application: The mixture should be applied within one hour of preparation. If the concrete surface is smooth and dense, it’s recommended that the surface is made rough for better bonding of the paste layer. Apply the mixed plaster uniformly on the prepared substrate using a steel trowel. The plaster can then be leveled to a desired finish using masonry tools. Different finish can be achieved using steel trowel, wooden float or sponge, as per finish required.